Potential of jute fiber-reinforced composites in the manufacture of components and equipment used on ships and hulls
DOI:
https://doi.org/10.61435/jese.2023.3Keywords:
Shipbuilding, Jute fiber, Natural fibers, CompositesAbstract
In today's maritime field, metal materials are very popular, but they have certain limitations. To meet a variety of requirements, many new materials have been used, including fiberglass reinforced composites, but these materials are often difficult to decompose, have poor recyclability, and cause a great impact on the environment after a period of use. There have been many studies aimed at using natural fibers to replace glass fibers in order to solve the limitations of glass fiber reinforced composites. Jute is one of the most popular natural fibers. Recently, researchers have focused their attention on jute fiber-reinforced composites. This article will talk about the potential of jute fiber reinforced composites applied to the manufacture of components and equipment used on ships and hulls.
References
Aktar, M. A., Alam, M. M., & Al-Amin, A. Q. (2021). Global economic crisis, energy use, CO2 emissions, and policy roadmap amid COVID-19. Sustainable Production and Consumption, 26, 770–781. https://doi.org/10.1016/j.spc.2020.12.029
Alves, C., Ferrão, P. M. C., Silva, A. J., Reis, L. G., Freitas, M., Rodrigues, L. B., & Alves, D. E. (2010). Ecodesign of automotive components making use of natural jute fiber composites. Journal of Cleaner Production, 18(4), 313–327. https://doi.org/10.1016/j.jclepro.2009.10.022
Anjali Singh, A., & Palsule, S. (2016). Jute fiber reinforced chemically functionalized polypropylene self-compatibilizing composites by Palsule process. Journal of Composite Materials, 50(9), 1199–1212. https://doi.org/10.1177/0021998315590260
Bai, B., Liu, Y., Wang, Q., Zou, J., Zhang, H., Jin, H., & Li, X. (2019). Experimental investigation on gasification characteristics of plastic wastes in supercritical water. Renewable Energy, 135, 32–40. https://doi.org/10.1016/j.renene.2018.11.092
Balan, G. S., & Ravichandran, M. (2020). Study of moisture absorption characteristics of jute fiber reinforced waste plastic filled polymer composite. Materials Today: Proceedings, 27, 712–717. https://doi.org/10.1016/j.matpr.2019.11.260
Bax, N., Williamson, A., Aguero, M., Gonzalez, E., & Geeves, W. (2003). Marine invasive alien species: a threat to global biodiversity. Marine Policy, 27(4), 313–323. https://doi.org/10.1016/S0308-597X(03)00041-1
Boopalan, M., Umapathy, M. J., & Jenyfer, P. (2012). A Comparative Study on the Mechanical Properties of Jute and Sisal Fiber Reinforced Polymer Composites. Silicon, 4(3), 145–149. https://doi.org/10.1007/s12633-012-9110-6
Bowman, S., Jiang, Q., Memon, H., Qiu, Y., Liu, W., & Wei, Y. (2018). Effects of Styrene-Acrylic Sizing on the Mechanical Properties of Carbon Fiber Thermoplastic Towpregs and Their Composites. Molecules, 23(3), 547. https://doi.org/10.3390/molecules23030547
Chan, F. T., Stanislawczyk, K., Sneekes, A. C., Dvoretsky, A., Gollasch, S., Minchin, D., David, M., Jelmert, A., Albretsen, J., & Bailey, S. A. (2019). Climate change opens new frontiers for marine species in the Arctic: Current trends and future invasion risks. Global Change Biology, 25(1), 25–38. https://doi.org/10.1111/gcb.14469
Chandekar, H., Chaudhari, V., Waigaonkar, S., & Mascarenhas, A. (2020). Effect of chemical treatment on mechanical properties and water diffusion characteristics of jute‐polypropylene composites. Polymer Composites, 41(4), 1447–1461. https://doi.org/10.1002/pc.25468
Chau, M. Q., Do, H. C., Le, T. T., Nguyen, X. P., & Nguyen, D. T. (2020). A numerical study on the flow considering the influence of moving objects under the free surface in marine engineering. 040002. https://doi.org/10.1063/5.0030625
Chau, M. Q., Hoang, A. T., Truong, T. T., & Nguyen, X. P. (2020). Endless story about the alarming reality of plastic waste in Vietnam. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1–9. https://doi.org/10.1080/15567036.2020.1802535
Chau, M. Q., Le, V. V., Hoang, A. T., Al-Tawaha, A. R. M. S., & Pham, V. V. (2020). A simulation research of heat transfers and chemical reactions in the fuel steam reformer using exhaust gas energy from motorcycle engine. Journal of Mechanical Engineering Research and Developments, 43(5), 89–102.
Chau, M. Q., Nguyen, X. P., Do, H. C., & Le, T. T. (2020). Numerical simulation for transverse migration of finite-size clean bubbles in homogeneous shear turbulence. AIP Conference Proceedings 2292, 040004. https://doi.org/10.1063/5.0030627
Chau, M. Q., Nguyen, X. P., Do, H. C., & Nguyen, D. T. (2020). A simulation study on the amplification of cavity induced air-fuel mixing in scramjet engine. 040003. https://doi.org/10.1063/5.0030626
David, M., Magaletti, E., Kraus, R., & Marini, M. (2019). Vulnerability to bioinvasions: Current status, risk assessment and management of ballast water through a regional approach – the Adriatic Sea. Marine Pollution Bulletin, 147, 1–7. https://doi.org/10.1016/j.marpolbul.2019.06.057
Dilfi K.F., A., Balan, A., Bin, H., Xian, G., & Thomas, S. (2018). Effect of surface modification of jute fiber on the mechanical properties and durability of jute fiber-reinforced epoxy composites. Polymer Composites, 39(S4), E2519–E2528. https://doi.org/10.1002/pc.24817
Doan, T.-T.-L., Brodowsky, H., & Mäder, E. (2012). Jute fibre/epoxy composites: Surface properties and interfacial adhesion. Composites Science and Technology, 72(10), 1160–1166. https://doi.org/10.1016/j.compscitech.2012.03.025
Fatima, S., & Mohanty, A. R. (2011). Acoustical and fire-retardant properties of jute composite materials. Applied Acoustics, 72(2–3), 108–114. https://doi.org/10.1016/j.apacoust.2010.10.005
Gassan, J., & Bledzki, A. K. (1997). Effect of moisture content on the properties of silanized jute-epoxy composites. Polymer Composites, 18(2), 179–184. https://doi.org/10.1002/pc.10272
Gassan, J., & Bledzki, A. K. (1999). Possibilities for improving the mechanical properties of jute/epoxy composites by alkali treatment of fibres. Composites Science and Technology, 59(9), 1303–1309. https://doi.org/10.1016/S0266-3538(98)00169-9
Ghaderi, H. (2019). Autonomous technologies in short sea shipping: trends, feasibility and implications. Transport Reviews, 39(1), 152–173. https://doi.org/10.1080/01441647.2018.1502834
Gopinath, A., Kumar, M. S., & Elayaperumal, A. (2014). Experimental Investigations on Mechanical Properties Of Jute Fiber Reinforced Composites with Polyester and Epoxy Resin Matrices. Procedia Engineering, 97, 2052–2063. https://doi.org/10.1016/j.proeng.2014.12.448
Hoang, A. T. (2018). Waste heat recovery from diesel engines based on Organic Rankine Cycle. Applied Energy, 231, 138–166. https://doi.org/10.1016/j.apenergy.2018.09.022
Hoang, A. T. (2020). Applicability of fuel injection techniques for modern diesel engines. AIP Conference Proceedings, 2207(1), 020018. https://doi.org/10.1063/5.0000133
Hoang, A. T., Huynh, T. T., Nguyen, X. P., Nguyen, T. K. T., & Le, T. H. (2021). An analysis and review on the global NO2 emission during lockdowns in COVID-19 period. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. https://doi.org/10.1080/15567036.2021.1902431
Hoang, A. T., Le, V. V., Al-Tawaha, A. R. M. S., Nguyen, D. N., Al-Tawaha, A. R. M. S., Noor, M. M., & Pham, V. V. (2018). An absorption capacity investigation of new absorbent based on polyurethane foams and rice straw for oil spill cleanup. Petroleum Science and Technology, 36(5), 361–370.
Hoang, A. T., Nguyen, X. P., Duong, X. Q., & Huynh, T. T. (2021). Sorbent-based devices for the removal of spilled oil from water: a review. Environmental Science and Pollution Research, 1–35.
Hoang, A. T., Nižetić, S., Cheng, C. K., Luque, R., Thomas, S., Banh, T. L., Pham, V. V., & Nguyen, X. P. (2022). Heavy metal removal by biomass-derived carbon nanotubes as a greener environmental remediation: A comprehensive review. Chemosphere, 287, 131959. https://doi.org/10.1016/j.chemosphere.2021.131959
Hoang, A. T., & Pham, V. V. (2018). A Review On Fuels Used For Marine Diesel Engines. Journal of Mechanical Engineering Research & Developments (JMERD), 41(4), 22–23. https://doi.org/10.26480/JMERD.04.2018.22.32
Hoang, A. T., & Pham, X. D. (2021). An investigation of remediation and recovery of oil spill and toxic heavy metal from maritime pollution by a new absorbent material. Journal of Marine Engineering & Technology, 20(3), 159–169. https://doi.org/10.1080/20464177.2018.1544401
Hoang, A. T., Sandro Nižetić, Olcer, A. I., Ong, H. C., Chen, W.-H., Chong, C. T., Thomas, S., Bandh, S. A., & Nguyen, X. P. (2021). Impacts of COVID-19 pandemic on the global energy system and the shift progress to renewable energy: Opportunities, challenges, and policy implications. Energy Policy, 154, 112322. https://doi.org/10.1016/j.enpol.2021.112322
Holley, N. P., Lee, J. G., Valsaraj, K. T., & Bharti, B. (2021). Synthesis and characterization of ZEin-based Low Density Porous Absorbent (ZELDA) for oil spill recovery. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 614, 126148. https://doi.org/10.1016/j.colsurfa.2021.126148
Hong, C. K., Hwang, I., Kim, N., Park, D. H., Hwang, B. S., & Nah, C. (2008). Mechanical properties of silanized jute–polypropylene composites. Journal of Industrial and Engineering Chemistry, 14(1), 71–76. https://doi.org/10.1016/j.jiec.2007.07.002
Huynh, T. T., Le, A. T., Pham, V. V., Hoang, A. T., & Nguyen, X. P. (2021). COVID-19 and the Global Shift Progress to Clean Energy. Journal of Energy Resources Technology, 143(9), 94701. https://doi.org/10.1115/1.4050779
Karmaker, A. C., & Youngquist, J. A. (1996). Injection molding of polypropylene reinforced with short jute fibers. Journal of Applied Polymer Science, 62(8), 1147–1151. https://doi.org/10.1002/(SICI)1097-4628(19961121)62:8<1147::AID-APP2>3.0.CO;2-I
Khalid, M. Y., Imran, R., Arif, Z. U., Akram, N., Arshad, H., Al Rashid, A., & García Márquez, F. P. (2021). Developments in Chemical Treatments, Manufacturing Techniques and Potential Applications of Natural-Fibers-Based Biodegradable Composites. Coatings, 11(3), 293. https://doi.org/10.3390/coatings11030293
Khalid, M. Y., Nasir, M. A., Ali, A., Al Rashid, A., & Khan, M. R. (2020). Experimental and numerical characterization of tensile property of jute/carbon fabric reinforced epoxy hybrid composites. SN Applied Sciences, 2(4), 577. https://doi.org/10.1007/s42452-020-2403-2
Kumar, A., & Srivastava, A. (2017). Preparation and Mechanical Properties of Jute Fiber Reinforced Epoxy Composites. Industrial Engineering & Management, 06(04). https://doi.org/10.4172/2169-0316.1000234
Kumar, P. (1986). Mechanical behaviour of jute fibres and their composites. Indian J. Technol., 24(1), 29–32.
Liu, L., Wang, Q., Xia, Z., Yu, J., & Cheng, L. (2010). Mechanical modification of degummed jute fibre for high value textile end uses. Industrial Crops and Products, 31(1), 43–47. https://doi.org/10.1016/j.indcrop.2009.08.006
Lovell, S. J., Stone, S. F., & Fernandez, L. (2006). The Economic Impacts of Aquatic Invasive Species: A Review of the Literature. Agricultural and Resource Economics Review, 35(1), 195–208. https://doi.org/10.1017/S1068280500010157
M.R., S., Siengchin, S., Parameswaranpillai, J., Jawaid, M., Pruncu, C. I., & Khan, A. (2019). A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization. Carbohydrate Polymers, 207, 108–121. https://doi.org/10.1016/j.carbpol.2018.11.083
Mansur, M. A., & Aziz, M. A. (1982). A study of jute fibre reinforced cement composites. International Journal of Cement Composites and Lightweight Concrete, 4(2), 75–82. https://doi.org/10.1016/0262-5075(82)90011-2
Maurya, H. O., Gupta, M. K., Srivastava, R. K., & Singh, H. (2015). Study on the Mechanical Properties of Epoxy Composite using Short Sisal Fibre. Materials Today: Proceedings, 2(4–5), 1347–1355. https://doi.org/10.1016/j.matpr.2015.07.053
Mohanty, S., Nayak, S. K., Verma, S. K., & Tripathy, S. S. (2004). Effect of MAPP as a Coupling Agent on the Performance of Jute–PP Composites. Journal of Reinforced Plastics and Composites, 23(6), 625–637. https://doi.org/10.1177/0731684404032868
Molnar, J. L., Gamboa, R. L., Revenga, C., & Spalding, M. D. (2008). Assessing the global threat of invasive species to marine biodiversity. Frontiers in Ecology and the Environment, 6(9), 485–492. https://doi.org/10.1890/070064
Neşer, G. (2017). Polymer Based Composites in Marine Use: History and Future Trends. Procedia Engineering, 194, 19–24. https://doi.org/10.1016/j.proeng.2017.08.111
Nguyen, H. P., Hoang, A. T., Nizetic, S., Nguyen, X. P., Le, A. T., Luong, C. N., Chu, V. D., & Pham, V. V. (2021). The electric propulsion system as a green solution for management strategy of CO 2 emission in ocean shipping: A comprehensive review. International Transactions on Electrical Energy Systems, 31(11). https://doi.org/10.1002/2050-7038.12580
Nguyen, X. P. (2020). A simulation study on the effects of hull form on aerodynamic performances of the ships. 020015. https://doi.org/10.1063/5.0000140
Nguyen, X. P., & Hoang, A. T. (2020). The Flywheel Energy Storage System: An Effective Solution to Accumulate Renewable Energy. 2020 6th International Conference on Advanced Computing and Communication Systems (ICACCS), 1322–1328. https://doi.org/10.1109/ICACCS48705.2020.9074469
Nguyen, X. P., Hoang, A. T., I.Ölçer, A., Engel, D., Pham, V. V., & Nayak, S. K. (2021). Biomass-derived 2,5-dimethylfuran as a promising alternative fuel: An application review on the compression and spark ignition engine. Fuel Processing Technology, 214(April), 106687. https://doi.org/10.1016/j.fuproc.2020.106687
Nguyen, X. P., Hoang, A. T., Ölçer, A. I., & Huynh, T. T. (2021). Record decline in global CO 2 emissions prompted by COVID-19 pandemic and its implications on future climate change policies. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1–4. https://doi.org/10.1080/15567036.2021.1879969
Nguyen, X. P., Le, N. D., Pham, V. V., Huynh, T. T., Dong, V. H., & Hoang, A. T. (2021). Mission, challenges, and prospects of renewable energy development in Vietnam. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1–13. https://doi.org/10.1080/15567036.2021.1965264
Nguyen, X. P., Nguyen, D. C., & Duong, L. H. (2020). A review of solutions to improve the efficiency of hydrogen-rich catalysts for engine application. 040009. https://doi.org/10.1063/5.0030996
Park, S.-Y., Woo, S.-H., & Lai, P.-L. (2021). Market structure of short sea shipping in northeast Asia. Maritime Business Review, 6(4), 414–429. https://doi.org/10.1108/MABR-08-2020-0050
Patel, V. A., & Parsania, P. H. (2010). Performance Evaluation of Alkali and Acrylic Acid Treated—Untreated Jute Composites of Mixed Epoxy—Phenolic Resins. Journal of Reinforced Plastics and Composites, 29(5), 725–730. https://doi.org/10.1177/0731684408100692
Peters, H. J. F. (2001). Developments in Global Seatrade and Container Shipping Markets: Their Effects on the Port Industry and Private Sector Involvement. International Journal of Maritime Economics, 3(1), 3–26. https://doi.org/10.1057/palgrave.ijme.9100003
Pham, V. V., & Hoang, A. T. (2020). Analyzing and selecting the typical propulsion systems for ocean supply vessels. 2020 6th International Conference on Advanced Computing and Communication Systems (ICACCS), 1349–1357. https://doi.org/10.1109/ICACCS48705.2020.9074276
Phan, H. H., Hoang, A. T., Nguyen, H. C., Le, Q. D., Nguyen, X. P., & Pham, X. D. (2018). The efficient lignocellulose-based sorbent for oil spill treatment from polyurethane and agricultural residue of Vietnam. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 40(3), 312–319. https://doi.org/10.1080/15567036.2017.1415397
Prokopowicz, A. K., & Berg-Andreassen, J. (2016). An Evaluation of Current Trends in Container Shipping Industry, Very Large Container Ships (VLCSs), and Port Capacities to Accommodate TTIP Increased Trade. Transportation Research Procedia, 14, 2910–2919. https://doi.org/10.1016/j.trpro.2016.05.409
Raghavendra, G., Kumar, K. A., Kumar, M. H., RaghuKumar, B., & Ojha, S. (2017). Moisture absorption behavior and its effect on the mechanical properties of jute-reinforced epoxy composite. Polymer Composites, 38(3), 516–522. https://doi.org/10.1002/pc.23610
Ravi, R., & Pachamuthu, S. (2020). Experimental investigation on innovatory waste heat recovery system impacts on DIESEL engine exhaust emissions. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1–24. https://doi.org/10.1080/15567036.2020.1758247
Rowinski, L., Nguyen, X. P., Hoang, A. T., Nižetić, S., & Duong, X. Q. (2021). Advanced super-hydrophobic polymer-based porous absorbents for the treatment of oil-polluted water. Chemosphere, 130274.
Ruiz, G. M., & Carlton, J. T. (2003). Invasive species: vectors and management strategies. Island Press.
Saebi, M., Xu, J., Grey, E. K., Lodge, D. M., Corbett, J. J., & Chawla, N. (2020). Higher-order patterns of aquatic species spread through the global shipping network. PLOS ONE, 15(7), e0220353. https://doi.org/10.1371/journal.pone.0220353
Sai Shravan Kumar, P., & Viswanath Allamraju, K. (2019). A Review Of Natural Fiber Composites [Jute, Sisal, Kenaf]. Materials Today: Proceedings, 18, 2556–2562. https://doi.org/10.1016/j.matpr.2019.07.113
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018). Characterization and properties of natural fiber polymer composites: A comprehensive review. Journal of Cleaner Production, 172, 566–581. https://doi.org/10.1016/j.jclepro.2017.10.101
Satyanarayana, K. G., Sukumaran, K., Mukherjee, P. S., Pavithran, C., & Pillai, S. G. K. (1990). Natural fibre-polymer composites. Cement and Concrete Composites, 12(2), 117–136. https://doi.org/10.1016/0958-9465(90)90049-4
Seki, Y. (2009). Innovative multifunctional siloxane treatment of jute fiber surface and its effect on the mechanical properties of jute/thermoset composites. Materials Science and Engineering: A, 508(1–2), 247–252. https://doi.org/10.1016/j.msea.2009.01.043
Shah, A. N., & Lakkad, S. C. (1981). Mechanical properties of jute-reinforced plastics. Fibre Science and Technology, 15(1), 41–46. https://doi.org/10.1016/0015-0568(81)90030-0
Shivamurthy, B., Naik, N., Thimappa, B. H. S., & Bhat, R. (2020). Mechanical property evaluation of alkali-treated jute fiber reinforced bio-epoxy composite materials. Materials Today: Proceedings, 28, 2116–2120. https://doi.org/10.1016/j.matpr.2020.04.016
Shubhra, Q. T., Alam, A., & Quaiyyum, M. (2013). Mechanical properties of polypropylene composites. Journal of Thermoplastic Composite Materials, 26(3), 362–391. https://doi.org/10.1177/0892705711428659
Suárez-Alemán, A. (2015). Short sea shipping in today’s Europe: A critical review of maritime transport policy. Maritime Economics & Logistics. https://doi.org/10.1057/mel.2015.10
Thyavihalli Girijappa, Y. G., Mavinkere Rangappa, S., Parameswaranpillai, J., & Siengchin, S. (2019). Natural Fibers as Sustainable and Renewable Resource for Development of Eco-Friendly Composites: A Comprehensive Review. Frontiers in Materials, 6, 1–14. https://doi.org/10.3389/fmats.2019.00226
Tillig, F., & Ringsberg, J. W. (2020). Design, operation and analysis of wind-assisted cargo ships. Ocean Engineering, 211, 107603. https://doi.org/10.1016/j.oceaneng.2020.107603
Upadhyay, U., Sreedhar, I., Singh, S. A., Patel, C. M., & Anitha, K. L. (2021). Recent advances in heavy metal removal by chitosan based adsorbents. Carbohydrate Polymers, 251, 117000. https://doi.org/10.1016/j.carbpol.2020.117000
Van, P., & Anh, H. (2019). Technological perspective for reducing emissions from marine engines. International Journal on Advanced Science, Engineering and Information Technology. https://doi.org/10.18517/ijaseit.9.6.10429
Vinayagam, N. K., Hoang, A. T., Solomon, J. M., Subramaniam, M., Balasubramanian, D., EL-Seesy, A. I., & Nguyen, X. P. (2021). Smart control strategy for effective Hydrocarbon and Carbon monoxide emission reduction on a conventional diesel engine using the pooled impact of pre-and post-combustion techniques. Journal of Cleaner Production, 306, 127310. https://doi.org/10.1016/j.jclepro.2021.127310
Wan, Z., Chen, J., Makhloufi, A. El, Sperling, D., & Chen, Y. (2016). Four routes to better maritime governance. Nature, 540(7631), 27–29. https://doi.org/10.1038/540027a
Wan, Z., Chen, J., & Sperling, D. (2018). Institutional barriers to the development of a comprehensive ballast-water management scheme in China: Perspective from a multi-stream policy model. Marine Policy, 91, 142–149. https://doi.org/10.1016/j.marpol.2018.02.016
Wang, H., Memon, H., A. M. Hassan, E., Miah, M. S., & Ali, M. A. (2019). Effect of Jute Fiber Modification on Mechanical Properties of Jute Fiber Composite. Materials, 12(8), 1226. https://doi.org/10.3390/ma12081226
Xuan, N. P., Van, P. V., & Anh, H. T. (2021). Integrating renewable sources into energy system for smart city as a sagacious strategy towards clean and sustainable process. Journal of Cleaner Production, 305, 127161. https://doi.org/10.1016/j.jclepro.2021.127161
Yuvaraj, L., Jeyanthi, S., & Yogananda, A. (2021). An acoustical investigation of partial perforation in jute fiber composite panel. Materials Today: Proceedings, 37, 665–670. https://doi.org/10.1016/j.matpr.2020.05.632
Downloads
Submitted
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Dinh Tuyen Nguyen, Huu Cuong Le
This work is licensed under a Creative Commons Attribution 4.0 International License.
Journal of Emerging Science and Engineering published under the terms of a Creative Commons Attribution 4.0 International License / CC BY 4.0 This license permits anyone to copy and redistribute this material in any form or format, compose, modify, and make derivative works of this material for any purpose, including commercial purposes, so long as they include credit to the Authors of the original work.
